Move user mappings to <space> and keep/remove selection to ,

44 files changed, 72 insertions, 68 deletions

diff --git a/README.asciidoc b/README.asciidoc
index 44b40fc0..f07cca40 100644
--- a/README.asciidoc
+++ b/README.asciidoc
@@ -628,8 +628,8 @@ pattern uses the last one.
 As a convenience, `<a-s>` allows you to split the current selections on
 line boundaries.
 
-To clear multiple selections, use `space`. To keep only the nth selection
-use `n` followed by `space`, in order to remove a selection, use `<a-space>`.
+To clear multiple selections, use `,`. To keep only the nth selection
+use `n` followed by `,`, in order to remove a selection, use `<a-,>`.
 
 `<a-k>` allows you to enter a regex and keep only the selections that
 contains a match for this regex. Using `<a-K>` you can keep the selections
diff --git a/contrib/TRAMPOLINE b/contrib/TRAMPOLINE
index d1595a77..744d48e3 100644
--- a/contrib/TRAMPOLINE
+++ b/contrib/TRAMPOLINE
@@ -356,14 +356,14 @@ using the built-in `:doc` command.
                     and additional manual editing of the selections is
         .---,       needed. In order to loop through all the selections and
         | ) |       remove the current one, two primitives are available:
-        `---'       respectively the parenthesis (`)`), and the alt/space
-                    key combination (`<a-space>`).
+        `---'       respectively the parenthesis (`)`), and the alt/comma
+                    key combination (`<a-,>`).
      .---, .---,
-     |alt|+|spc|    Example: given a list of three numbers all selected
+     |alt|+| , |    Example: given a list of three numbers all selected
      `---' `---'    individually, (e.g., `1 2 3`), deselecting the second
                     selection would be done by hitting the parenthesis primitive
                     (`)`) until the according selection is the current one,
-                    then hitting `<a-space>` to end up with only the first
+                    then hitting `<a-,>` to end up with only the first
                     and third number selected.
 
                     However, being able to trim out some selections out
diff --git a/doc/pages/changelog.asciidoc b/doc/pages/changelog.asciidoc
index d81c5809..df33139b 100644
--- a/doc/pages/changelog.asciidoc
+++ b/doc/pages/changelog.asciidoc
@@ -12,6 +12,9 @@ released versions.
 * `x` now just extends the selection to contain full lines (as `<a-x>` did)
   `<a-x>` trims partial lines from the selection (as `<a-X>` did)
 
+* User mappings is now bound to `<space>` while keeping/removing main selection
+  moved to `,` and `<a-,>`
+
 == Kakoune 2021.11.07
 
 * Support for curly and separately colored underlines (undocumented in 2021.10.28)
diff --git a/doc/pages/keys.asciidoc b/doc/pages/keys.asciidoc
index 29ddb54b..9f171386 100644
--- a/doc/pages/keys.asciidoc
+++ b/doc/pages/keys.asciidoc
@@ -575,10 +575,10 @@ to skim through the jump list using:
 *<a-C>*::
     copy the main selection to the previous line
 
-*<space>*::
+*,*::
     clear selections to only keep the main one
 
-*<a-space>*::
+*<a-,>*::
     clear the main selection
 
 *<a-k>*::
@@ -822,6 +822,6 @@ The following keys are recognized by this mode to help with editing
 
 == User commands
 
-*,*::
+*<space>*::
     enter default `user mode` to access custom commands
     (See <<modes#user-mode,`:doc modes user-mode`>>)
diff --git a/doc/pages/modes.asciidoc b/doc/pages/modes.asciidoc
index 754dda5b..f739ae98 100644
--- a/doc/pages/modes.asciidoc
+++ b/doc/pages/modes.asciidoc
@@ -89,8 +89,8 @@ See object commands <<keys#object-selection,`:doc keys object-selection`>>.
 
 === User mode
 
-Mode entered with `,` (comma key). The user mode is empty by default and is
-the opportunity to store custom mappings with no risk to shadow builtin ones.
+Mode entered with `<space>`. The user mode is empty by default and is the
+opportunity to store custom mappings with no risk to shadow builtin ones.
 The context of execution is always the Normal mode.
 
 == User modes
diff --git a/rc/detection/editorconfig.kak b/rc/detection/editorconfig.kak
index 6bfe1600..aac35c58 100644
--- a/rc/detection/editorconfig.kak
+++ b/rc/detection/editorconfig.kak
@@ -45,7 +45,7 @@ define-command editorconfig-load -params ..1 -docstring "editorconfig-load [file
                             print "set-option buffer BOM utf8"
                         }
                         if (trim_trailing_whitespace == "true") {
-                            print "hook buffer BufWritePre \"" file "\" -group editorconfig-hooks %{ try %{ execute-keys -draft %{ %s\\h+$|\\n+\\z<ret>d } } }"
+                            print "hook buffer BufWritePre \"" file "\" -group editorconfig-hooks %{ try %{ execute-keys -draft %{%s\\h+$|\\n+\\z<ret>d} } }"
                         }
                         if (max_line_length && max_line_length != "off") {
                             print "set window autowrap_column " max_line_length
diff --git a/rc/filetype/c-family.kak b/rc/filetype/c-family.kak
index 7ef1c975..3682d323 100644
--- a/rc/filetype/c-family.kak
+++ b/rc/filetype/c-family.kak
@@ -108,7 +108,7 @@ define-command -hidden c-family-indent-on-newline %< evaluate-commands -draft -i
         # Validate selection and get first and last char
         execute-keys <a-k>\A[{(](\h*\S+)+\n<ret> <a-K>"(([^"]*"){2})*<ret> <a-K>'(([^']*'){2})*<ret> <a-:><a-semicolon>L <a-S>
         # Remove possibly incorrect indent from new line which was copied from previous line
-        try %< execute-keys -draft <space> <a-h> s\h+<ret> d >
+        try %< execute-keys -draft , <a-h> s\h+<ret> d >
         # Now indent and align that new line with the opening parenthesis/brace
         execute-keys 1<a-&> &
      > >
diff --git a/rc/filetype/cabal.kak b/rc/filetype/cabal.kak
index 684542e2..a1f45261 100644
--- a/rc/filetype/cabal.kak
+++ b/rc/filetype/cabal.kak
@@ -65,7 +65,7 @@ define-command -hidden cabal-indent-on-new-line %[
         # filter previous line
         try %[ execute-keys -draft k : cabal-trim-indent <ret> ]
         # indent after lines ending with { or :
-        try %[ execute-keys -draft <space> k x <a-k> [:{]$ <ret> j <a-gt> ]
+        try %[ execute-keys -draft , k x <a-k> [:{]$ <ret> j <a-gt> ]
         # deindent closing brace when after cursor
         try %[ execute-keys -draft x <a-k> \h*\} <ret> gh / \} <ret> m <a-S> 1<a-&> ]
     ]
diff --git a/rc/filetype/clojure.kak b/rc/filetype/clojure.kak
index 4152fb17..d876262a 100644
--- a/rc/filetype/clojure.kak
+++ b/rc/filetype/clojure.kak
@@ -213,7 +213,7 @@ define-command -hidden clojure-indent-on-new-line %{
         }
         try %{ execute-keys -draft '[rl"i<a-Z><gt>' }
         try %{ execute-keys -draft '[Bl"i<a-Z><gt>' }
-        execute-keys -draft ';"i<a-z>a&<space>'
+        execute-keys -draft ';"i<a-z>a&,'
     }
 }
 
diff --git a/rc/filetype/crystal.kak b/rc/filetype/crystal.kak
index 5a62e7dc..e3540678 100644
--- a/rc/filetype/crystal.kak
+++ b/rc/filetype/crystal.kak
@@ -251,7 +251,7 @@ define-command -hidden crystal-fetch-objects %{
     set-register dquote %sh{
         curl --location https://crystal-lang.org/api/ |
         # Remove Top Level Namespace
-        kak -f '%1sdata-id="github.com/crystal-lang/crystal/(\w+)"<ret>)<a-space>y%<a-R>a<ret><esc><a-_>a<del><esc>'
+        kak -f '%1sdata-id="github.com/crystal-lang/crystal/(\w+)"<ret>)<a-,>y%<a-R>a<ret><esc><a-_>a<del><esc>'
     }
 }
 
diff --git a/rc/filetype/cucumber.kak b/rc/filetype/cucumber.kak
index 00c2a42f..f8f54152 100644
--- a/rc/filetype/cucumber.kak
+++ b/rc/filetype/cucumber.kak
@@ -95,7 +95,7 @@ define-command -hidden cucumber-indent-on-new-line %{
         # filter previous line
         try %{ execute-keys -draft k : cucumber-trim-indent <ret> }
         # indent after lines containing :
-        try %{ execute-keys -draft <space> k x <a-k> : <ret> j <a-gt> }
+        try %{ execute-keys -draft , k x <a-k> : <ret> j <a-gt> }
     }
 }
 
diff --git a/rc/filetype/d.kak b/rc/filetype/d.kak
index 7d2f307b..359c1ca9 100644
--- a/rc/filetype/d.kak
+++ b/rc/filetype/d.kak
@@ -126,7 +126,7 @@ define-command -hidden d-indent-on-new-line %~
         # indent after a switch's case/default statements
         try %[ execute-keys -draft kx <a-k> ^\h*(case|default).*:$ <ret> j<a-gt> ]
         # indent after if|else|while|for
-        try %[ execute-keys -draft <semicolon><a-F>)MB <a-k> \A(if|else|while|for)\h*\(.*\)\h*\n\h*\n?\z <ret> s \A|.\z <ret> 1<a-&>1<a-space><a-gt> ]
+        try %[ execute-keys -draft <semicolon><a-F>)MB <a-k> \A(if|else|while|for)\h*\(.*\)\h*\n\h*\n?\z <ret> s \A|.\z <ret> 1<a-&>1<a-,><a-gt> ]
         # deindent closing brace(s) when after cursor
         try %[ execute-keys -draft x <a-k> ^\h*[})] <ret> gh / [})] <ret> m <a-S> 1<a-&> ]
     =
diff --git a/rc/filetype/dart.kak b/rc/filetype/dart.kak
index 7091f1c5..d6623591 100644
--- a/rc/filetype/dart.kak
+++ b/rc/filetype/dart.kak
@@ -107,7 +107,7 @@ define-command -hidden dart-indent-on-new-line %~
         # indent after a switch's case/default statements
         try %[ execute-keys -draft kx <a-k> ^\h*(case|default).*:$ <ret> j<a-gt> ]
         # indent after if|else|while|for
-        try %[ execute-keys -draft <semicolon><a-F>)MB <a-k> \A(if|else|while|for)\h*\(.*\)\h*\n\h*\n?\z <ret> s \A|.\z <ret> 1<a-&>1<a-space><a-gt> ]
+        try %[ execute-keys -draft <semicolon><a-F>)MB <a-k> \A(if|else|while|for)\h*\(.*\)\h*\n\h*\n?\z <ret> s \A|.\z <ret> 1<a-&>1<a-,><a-gt> ]
         # deindent closing brace when after cursor
         try %[ execute-keys -draft x <a-k> ^\h*\} <ret> gh / \} <ret> m <a-S> 1<a-&> ]
     =
diff --git a/rc/filetype/fennel.kak b/rc/filetype/fennel.kak
index 91368cc5..7b82a8e8 100644
--- a/rc/filetype/fennel.kak
+++ b/rc/filetype/fennel.kak
@@ -102,7 +102,7 @@ define-command -hidden fennel-indent-on-new-line %{
         }
         try %{ execute-keys -draft '[rl"i<a-Z><gt>' }
         try %{ execute-keys -draft '[Bl"i<a-Z><gt>' }
-        execute-keys -draft ';"i<a-z>a&<space>'
+        execute-keys -draft ';"i<a-z>a&,'
     }
 }
 
diff --git a/rc/filetype/fsharp.kak b/rc/filetype/fsharp.kak
index f2909e0b..64d6b2c0 100644
--- a/rc/filetype/fsharp.kak
+++ b/rc/filetype/fsharp.kak
@@ -148,9 +148,9 @@ define-command -hidden fsharp-indent-on-new-line %{
         # cleanup trailing whitespaces from previous line
         try %{ execute-keys -draft k x s \h+$ <ret> d }
         # indent after line ending with =
-        try %{ execute-keys -draft <space> k x <a-k> =$ <ret> j <a-gt> }
+        try %{ execute-keys -draft , k x <a-k> =$ <ret> j <a-gt> }
         # indent after line ending with "do"
-        try %{ execute-keys -draft <space> k x <a-k> \bdo$ <ret> j <a-gt> }
+        try %{ execute-keys -draft , k x <a-k> \bdo$ <ret> j <a-gt> }
     }
 }
 
diff --git a/rc/filetype/gdscript.kak b/rc/filetype/gdscript.kak
index 7f716554..3fb758c7 100644
--- a/rc/filetype/gdscript.kak
+++ b/rc/filetype/gdscript.kak
@@ -101,7 +101,7 @@ define-command -hidden gdscript-indent-on-new-line %<
         # cleanup trailing whitespaces from previous line
         try %{ execute-keys -draft k x s \h+$ <ret> d }
         # indent after line ending with :
-        try %{ execute-keys -draft <space> k x <a-k> :$ <ret> <a-K> ^\h*# <ret> j <a-gt> }
+        try %{ execute-keys -draft , k x <a-k> :$ <ret> <a-K> ^\h*# <ret> j <a-gt> }
         # deindent closing brace/bracket when after cursor (for arrays and dictionaries)
         try %< execute-keys -draft x <a-k> ^\h*[}\]] <ret> gh / [}\]] <ret> m <a-S> 1<a-&> >
     >
diff --git a/rc/filetype/hbs.kak b/rc/filetype/hbs.kak
index 5a9efaef..5ea99bc7 100644
--- a/rc/filetype/hbs.kak
+++ b/rc/filetype/hbs.kak
@@ -72,7 +72,7 @@ define-command -hidden hbs-trim-indent %{
 define-command -hidden hbs-indent-on-char %[
     evaluate-commands -draft -itersel %[
         # de-indent after closing a yielded block tag
-        try %[ execute-keys -draft <space> <a-h> s ^\h+\{\{/([\w-.]+(?:/[\w-.]+)*)\}\}$ <ret> {c\{\{#<c-r>1,\{\{/<c-r>1\}\} <ret> s \A|.\z <ret> 1<a-&> ]
+        try %[ execute-keys -draft , <a-h> s ^\h+\{\{/([\w-.]+(?:/[\w-.]+)*)\}\}$ <ret> {c\{\{#<c-r>1,\{\{/<c-r>1\}\} <ret> s \A|.\z <ret> 1<a-&> ]
     ]
 ]
 
diff --git a/rc/filetype/html.kak b/rc/filetype/html.kak
index 8a68c69f..0b09ef6a 100644
--- a/rc/filetype/html.kak
+++ b/rc/filetype/html.kak
@@ -70,7 +70,7 @@ define-command -hidden html-trim-indent %{
 define-command -hidden html-indent-on-greater-than %[
     evaluate-commands -draft -itersel %[
         # align closing tag to opening when alone on a line
-        try %[ execute-keys -draft <space> <a-h> s ^\h+<lt>/(\w+)<gt>$ <ret> {c<lt><c-r>1,<lt>/<c-r>1<gt> <ret> s \A|.\z <ret> 1<a-&> ]
+        try %[ execute-keys -draft , <a-h> s ^\h+<lt>/(\w+)<gt>$ <ret> {c<lt><c-r>1,<lt>/<c-r>1<gt> <ret> s \A|.\z <ret> 1<a-&> ]
     ]
 ]
 
diff --git a/rc/filetype/janet.kak b/rc/filetype/janet.kak
index 2ce53936..b5f7c7b5 100644
--- a/rc/filetype/janet.kak
+++ b/rc/filetype/janet.kak
@@ -71,7 +71,7 @@ define-command -hidden janet-indent-on-new-line %{
         }
         try %{ execute-keys -draft '[rl"i<a-Z><gt>' }
         try %{ execute-keys -draft '[Bl"i<a-Z><gt>' }
-        execute-keys -draft '"i<a-z>a&<space>'
+        execute-keys -draft '"i<a-z>a&,'
     }
 }
 
diff --git a/rc/filetype/java.kak b/rc/filetype/java.kak
index d252b4b6..69b0d74e 100644
--- a/rc/filetype/java.kak
+++ b/rc/filetype/java.kak
@@ -58,7 +58,7 @@ define-command -hidden java-indent-on-new-line %~
         # indent after a switch's case/default statements
         try %[ execute-keys -draft kx <a-k> ^\h*(case|default).*:$ <ret> j<a-gt> ]
         # indent after keywords
-        try %[ execute-keys -draft <semicolon><a-F>)MB <a-k> \A(if|else|while|for|try|catch)\h*\(.*\)\h*\n\h*\n?\z <ret> s \A|.\z <ret> 1<a-&>1<a-space><a-gt> ]
+        try %[ execute-keys -draft <semicolon><a-F>)MB <a-k> \A(if|else|while|for|try|catch)\h*\(.*\)\h*\n\h*\n?\z <ret> s \A|.\z <ret> 1<a-&>1<a-,><a-gt> ]
         # deindent closing brace(s) when after cursor
         try %[ execute-keys -draft x <a-k> ^\h*[})] <ret> gh / [})] <ret> m <a-S> 1<a-&> ]
     =
diff --git a/rc/filetype/javascript.kak b/rc/filetype/javascript.kak
index 1f39aa6a..64c7c862 100644
--- a/rc/filetype/javascript.kak
+++ b/rc/filetype/javascript.kak
@@ -146,7 +146,7 @@ define-command -hidden javascript-indent-on-new-line %<
         # Validate selection and get first and last char
         execute-keys <a-k>\A[{(](\h*\S+)+\n<ret> <a-K>"(([^"]*"){2})*<ret> <a-K>'(([^']*'){2})*<ret> <a-:><a-semicolon>L <a-S>
         # Remove possibly incorrect indent from new line which was copied from previous line
-        try %< execute-keys -draft <space> <a-h> s\h+<ret> d >
+        try %< execute-keys -draft , <a-h> s\h+<ret> d >
         # Now indent and align that new line with the opening parenthesis/brace
         execute-keys 1<a-&> &
      > >
diff --git a/rc/filetype/kotlin.kak b/rc/filetype/kotlin.kak
index 14a8ff59..152de4b4 100644
--- a/rc/filetype/kotlin.kak
+++ b/rc/filetype/kotlin.kak
@@ -126,7 +126,7 @@ define-command -hidden kotlin-indent-on-new-line %~
     # indent after term on an expression
     try %[ execute-keys -draft kx <a-k> =\h*?$ <ret> j<a-gt> ]
     # indent after keywords
-    try %[ execute-keys -draft <semicolon><a-F>)MB <a-k> \A(catch|do|else|for|if|try|while)\h*\(.*\)\h*\n\h*\n?\z <ret> s \A|.\z <ret> 1<a-&>1<a-space><a-gt> ]
+    try %[ execute-keys -draft <semicolon><a-F>)MB <a-k> \A(catch|do|else|for|if|try|while)\h*\(.*\)\h*\n\h*\n?\z <ret> s \A|.\z <ret> 1<a-&>1<a-,><a-gt> ]
     # deindent closing brace(s) when after cursor
     try %[ execute-keys -draft x <a-k> ^\h*[})] <ret> gh / [})] <ret> m <a-S> 1<a-&> ]
   >
diff --git a/rc/filetype/lisp.kak b/rc/filetype/lisp.kak
index 153acbcf..9ab91826 100644
--- a/rc/filetype/lisp.kak
+++ b/rc/filetype/lisp.kak
@@ -74,7 +74,7 @@ define-command -hidden lisp-indent-on-new-line %{
         }
         try %{ execute-keys -draft '[rl"i<a-Z><gt>' }
         try %{ execute-keys -draft '[Bl"i<a-Z><gt>' }
-        execute-keys -draft ';"i<a-z>a&<space>'
+        execute-keys -draft ';"i<a-z>a&,'
     }
 }
 
diff --git a/rc/filetype/lua.kak b/rc/filetype/lua.kak
index b1bcf4ea..98354770 100644
--- a/rc/filetype/lua.kak
+++ b/rc/filetype/lua.kak
@@ -106,13 +106,13 @@ define-command -hidden lua-indent-on-new-line %[
         # remove trailing white spaces from previous line
         try %[ execute-keys -draft k : lua-trim-indent <ret> ]
         # preserve previous non-empty line indent
-        try %[ execute-keys -draft <space>gh<a-?>^[^\n]+$<ret>s\A|.\z<ret>)<a-&> ]
+        try %[ execute-keys -draft ,gh<a-?>^[^\n]+$<ret>s\A|.\z<ret>)<a-&> ]
         # add one indentation level if the previous line is not a comment and:
         #     - starts with a block keyword that is not closed on the same line,
         #     - or contains an unclosed function expression,
         #     - or ends with an enclosed '(' or '{'
         try %[ execute-keys -draft \
-            <space> Kx \
+            , Kx \
             <a-K>\A\h*--<ret> \
             <a-K>\A[^\n]*\b(end|until)\b<ret> \
             <a-k>\A(\h*\b(do|else|elseif|for|function|if|repeat|while)\b|[^\n]*[({]$|[^\n]*\bfunction\b\h*[(])<ret> \
diff --git a/rc/filetype/mercury.kak b/rc/filetype/mercury.kak
index 7992c889..813b4ca0 100644
--- a/rc/filetype/mercury.kak
+++ b/rc/filetype/mercury.kak
@@ -115,7 +115,7 @@ define-command -hidden mercury-indent-on-new-line %<
         # cleanup trailing whitespaces from previous line
         try %{ execute-keys -draft k x s \h+$ <ret> d }
         # indent after line ending with :-
-        try %{ execute-keys -draft <space> k x <a-k> :-$ <ret> j <a-gt> }
+        try %{ execute-keys -draft , k x <a-k> :-$ <ret> j <a-gt> }
         # deindent closing brace/bracket when after cursor
         try %< execute-keys -draft x <a-k> ^\h*[}\])] <ret> gh / [}\])] <ret> m <a-S> 1<a-&> >
     >
diff --git a/rc/filetype/moon.kak b/rc/filetype/moon.kak
index fcd7c130..43d8dd4d 100644
--- a/rc/filetype/moon.kak
+++ b/rc/filetype/moon.kak
@@ -91,7 +91,7 @@ define-command -hidden moon-indent-on-char %{
         # align _else_ statements to start
         try %{ execute-keys -draft x <a-k> ^ \h * (else(if)?) $ <ret> <a-semicolon> <a-?> ^ \h * (if|unless|when) <ret> s \A | \z <ret> ) <a-&> }
         # align _when_ to _switch_ then indent
-        try %{ execute-keys -draft x <a-k> ^ \h * (when) $ <ret> <a-semicolon> <a-?> ^ \h * (switch) <ret> s \A | \z <ret> ) <a-&> ) <space> <gt> }
+        try %{ execute-keys -draft x <a-k> ^ \h * (when) $ <ret> <a-semicolon> <a-?> ^ \h * (switch) <ret> s \A | \z <ret> ) <a-&> ) , <gt> }
         # align _catch_ and _finally_ to _try_
         try %{ execute-keys -draft x <a-k> ^ \h * (catch|finally) $ <ret> <a-semicolon> <a-?> ^ \h * (try) <ret> s \A | \z <ret> ) <a-&> }
     }
diff --git a/rc/filetype/nim.kak b/rc/filetype/nim.kak
index 916b9d19..2c00ac39 100644
--- a/rc/filetype/nim.kak
+++ b/rc/filetype/nim.kak
@@ -125,7 +125,7 @@ define-command -hidden nim-indent-on-new-line %{
         # cleanup trailing whitespaces from previous line
         try %{ exec -draft k x s \h+$ <ret> d }
         # indent after line ending with enum, tuple, object, type, import, export, const, let, var, ':' or '='
-        try %{ exec -draft <space> k x <a-k> (:|=|\b(?:enum|tuple|object|const|let|var|import|export|type))$ <ret> j <a-gt> }
+        try %{ exec -draft , k x <a-k> (:|=|\b(?:enum|tuple|object|const|let|var|import|export|type))$ <ret> j <a-gt> }
     }
 }
 
diff --git a/rc/filetype/perl.kak b/rc/filetype/perl.kak
index 699b94d4..2fcb0265 100644
--- a/rc/filetype/perl.kak
+++ b/rc/filetype/perl.kak
@@ -127,7 +127,7 @@ define-command -hidden perl-indent-on-new-line %~
         # indent after a switch's case/default statements
         try %[ execute-keys -draft kx <a-k> ^\h*(case|default).*:$ <ret> j<a-gt> ]
         # indent after if|else|while|for
-        try %[ execute-keys -draft <semicolon><a-F>)MB <a-k> \A(if|else|while|for)\h*\(.*\)\h*\n\h*\n?\z <ret> s \A|.\z <ret> 1<a-&>1<a-space><a-gt> ]
+        try %[ execute-keys -draft <semicolon><a-F>)MB <a-k> \A(if|else|while|for)\h*\(.*\)\h*\n\h*\n?\z <ret> s \A|.\z <ret> 1<a-&>1<a-,><a-gt> ]
         # deindent closing brace(s) when after cursor
         try %[ execute-keys -draft x <a-k> ^\h*[})] <ret> gh / [})] <ret> m <a-S> 1<a-&> ]
     =
diff --git a/rc/filetype/pony.kak b/rc/filetype/pony.kak
index 592fb943..f0fa8e28 100644
--- a/rc/filetype/pony.kak
+++ b/rc/filetype/pony.kak
@@ -91,13 +91,13 @@ define-command -hidden pony-insert-on-new-line %{
 define-command -hidden pony-indent-on-new-line %{
     evaluate-commands -draft -itersel %{
         # preserve previous line indent
-        try %{ execute-keys -draft <space> K <a-&> }
+        try %{ execute-keys -draft , K <a-&> }
         # cleanup trailing whitespaces from previous line
         try %{ execute-keys -draft k x s \h+$ <ret> d }
         # indent after line ending with :
-        try %{ execute-keys -draft <space> k x <a-k> (\b(?:do|try|then|else)|:|=>)$ <ret> j <a-gt> }
+        try %{ execute-keys -draft , k x <a-k> (\b(?:do|try|then|else)|:|=>)$ <ret> j <a-gt> }
         # else, end are always de-indented
-        try %{ execute-keys -draft <space> k x <a-k> \b(else|end):$ <ret> k x s ^\h* <ret> y j x <a-k> ^<c-r>" <ret> J <a-lt> }
+        try %{ execute-keys -draft , k x <a-k> \b(else|end):$ <ret> k x s ^\h* <ret> y j x <a-k> ^<c-r>" <ret> J <a-lt> }
     }
 }
 
diff --git a/rc/filetype/pug.kak b/rc/filetype/pug.kak
index f9520bbe..db05c9bc 100644
--- a/rc/filetype/pug.kak
+++ b/rc/filetype/pug.kak
@@ -74,7 +74,7 @@ define-command -hidden pug-indent-on-new-line %{
         # copy '//', '|', '-' or '(!)=' prefix and following whitespace
         try %{ execute-keys -draft k x s ^\h*\K[/|!=-]{1,2}\h* <ret> y gh j P }
         # indent unless we copied something above
-        try %{ execute-keys -draft <a-gt> <space> b s \S <ret> g l <a-lt> }
+        try %{ execute-keys -draft <a-gt> , b s \S <ret> g l <a-lt> }
     }
 }
 
diff --git a/rc/filetype/python.kak b/rc/filetype/python.kak
index ff60297a..6444423b 100644
--- a/rc/filetype/python.kak
+++ b/rc/filetype/python.kak
@@ -160,7 +160,7 @@ define-command -hidden python-indent-on-new-line %<
         # cleanup trailing whitespaces from previous line
         try %{ execute-keys -draft k x s \h+$ <ret> d }
         # indent after line ending with :
-        try %{ execute-keys -draft <space> k x <a-k> :$ <ret> <a-K> ^\h*# <ret> j <a-gt> }
+        try %{ execute-keys -draft , k x <a-k> :$ <ret> <a-K> ^\h*# <ret> j <a-gt> }
         # deindent closing brace/bracket when after cursor (for arrays and dictionaries)
         try %< execute-keys -draft x <a-k> ^\h*[}\]] <ret> gh / [}\]] <ret> m <a-S> 1<a-&> >
     >
diff --git a/rc/filetype/r.kak b/rc/filetype/r.kak
index 30d15430..d3d98547 100644
--- a/rc/filetype/r.kak
+++ b/rc/filetype/r.kak
@@ -93,7 +93,7 @@ define-command -hidden r-indent-on-newline %< evaluate-commands -draft -itersel
         # Validate selection and get first and last char
         execute-keys <a-k>\A[{(](\h*\S+)+\n<ret> <a-K>"(([^"]*"){2})*<ret> <a-K>'(([^']*'){2})*<ret> <a-:><a-semicolon>L <a-S>
         # Remove possibly incorrect indent from new line which was copied from previous line
-        try %< execute-keys -draft <space> <a-h> s\h+<ret> d >
+        try %< execute-keys -draft , <a-h> s\h+<ret> d >
         # Now indent and align that new line with the opening parenthesis/brace
         execute-keys 1<a-&> &
      > >
diff --git a/rc/filetype/sh.kak b/rc/filetype/sh.kak
index 7a284c84..9a9f51e7 100644
--- a/rc/filetype/sh.kak
+++ b/rc/filetype/sh.kak
@@ -120,11 +120,11 @@ define-command -hidden sh-indent-on-new-line %¶
         # done
         #
         # indent after do
-        try %{ execute-keys -draft <space> k x <a-k> \bdo$ <ret> j <a-gt> }
+        try %{ execute-keys -draft , k x <a-k> \bdo$ <ret> j <a-gt> }
         # copy the indentation of the matching for/when - matching on the do
         # statement, so we don't need to duplicate this for the two loop
         # structures.
-        try %{ execute-keys -draft <space> k x <a-k> \bdone$ <ret> gh [c\bdo\b,\bdone\b <ret> x <a-S> 1<a-&> <space> j K <a-&> }
+        try %{ execute-keys -draft , k x <a-k> \bdone$ <ret> gh [c\bdo\b,\bdone\b <ret> x <a-S> 1<a-&> , j K <a-&> }
 
         # Indent if/then/else syntax, e.g.:
         # if [ $foo = $bar ]; then
@@ -142,11 +142,11 @@ define-command -hidden sh-indent-on-new-line %¶
         # fi
         #
         # indent after then
-        try %{ execute-keys -draft <space> k x <a-k> \bthen$ <ret> j <a-gt> }
+        try %{ execute-keys -draft , k x <a-k> \bthen$ <ret> j <a-gt> }
         # copy the indentation of the matching if
-        try %{ execute-keys -draft <space> k x <a-k> \bfi$ <ret> gh [c\bif\b,\bfi\b <ret> x <a-S> 1<a-&> <space> j K <a-&> }
+        try %{ execute-keys -draft , k x <a-k> \bfi$ <ret> gh [c\bif\b,\bfi\b <ret> x <a-S> 1<a-&> , j K <a-&> }
         # copy the indentation of the matching if, and then re-indent afterwards
-        try %{ execute-keys -draft <space> k x <a-k> \belse$ <ret> gh [c\bif\b,\bfi\b <ret> x <a-S> 1<a-&> <space> j K <a-&> j <a-gt> }
+        try %{ execute-keys -draft , k x <a-k> \belse$ <ret> gh [c\bif\b,\bfi\b <ret> x <a-S> 1<a-&> , j K <a-&> j <a-gt> }
 
         # Indent case syntax, e.g.:
         # case "$foo" in
@@ -166,13 +166,13 @@ define-command -hidden sh-indent-on-new-line %¶
         # esac
         #
         # indent after in
-        try %{ execute-keys -draft <space> k x <a-k> \bin$ <ret> j <a-gt> }
+        try %{ execute-keys -draft , k x <a-k> \bin$ <ret> j <a-gt> }
         # copy the indentation of the matching case
-        try %{ execute-keys -draft <space> k x <a-k> \besac$ <ret> gh [c\bcase\b,\besac\b <ret> x <a-S> 1<a-&> <space> j K <a-&> }
+        try %{ execute-keys -draft , k x <a-k> \besac$ <ret> gh [c\bcase\b,\besac\b <ret> x <a-S> 1<a-&> , j K <a-&> }
         # indent after )
-        try %{ execute-keys -draft <space> k x <a-k> ^\s*\(?[^(]+[^)]\)$ <ret> j <a-gt> }
+        try %{ execute-keys -draft , k x <a-k> ^\s*\(?[^(]+[^)]\)$ <ret> j <a-gt> }
         # deindent after ;;
-        try %{ execute-keys -draft <space> k x <a-k> ^\s*\;\;$ <ret> j <a-lt> }
+        try %{ execute-keys -draft , k x <a-k> ^\s*\;\;$ <ret> j <a-lt> }
 
         # Indent compound commands as logical blocks, e.g.:
         # {
@@ -194,9 +194,9 @@ define-command -hidden sh-indent-on-new-line %¶
         # white space (including a newline), though technically it can also be
         # ';'. Only vertical white space makes sense in this context, though,
         # since the syntax denotes a logical block, not a simple compound command.
-        try %= execute-keys -draft <space> k x <a-k> (\s|^)\{$ <ret> j <a-gt> =
+        try %= execute-keys -draft , k x <a-k> (\s|^)\{$ <ret> j <a-gt> =
         # deindent closing }
-        try %= execute-keys -draft <space> k x <a-k> ^\s*\}$ <ret> <a-lt> j K <a-&> =
+        try %= execute-keys -draft , k x <a-k> ^\s*\}$ <ret> <a-lt> j K <a-&> =
         # deindent closing } when after cursor
         try %= execute-keys -draft x <a-k> ^\h*\} <ret> gh / \} <ret> m <a-S> 1<a-&> =
 
diff --git a/rc/filetype/vhdl.kak b/rc/filetype/vhdl.kak
index ddb9e5ee..289a4875 100644
--- a/rc/filetype/vhdl.kak
+++ b/rc/filetype/vhdl.kak
@@ -399,10 +399,10 @@ define-command -hidden vhdl-indent-on-new-line %{
         ]
 
         # Copy the indentation of the matching if.
-        try %{ execute-keys -draft <space> k x <a-k> ^\h*(elsif\b|else$) <ret> gh [c^\h*(\S*\h*:\h*)?if\b,\bend\sif\b <ret> x <a-S> 1<a-&> <space> j K <a-&> }
+        try %{ execute-keys -draft , k x <a-k> ^\h*(elsif\b|else$) <ret> gh [c^\h*(\S*\h*:\h*)?if\b,\bend\sif\b <ret> x <a-S> 1<a-&> , j K <a-&> }
 
         # Increase indent after some operators.
-        try %[ execute-keys -draft <semicolon> <space> k x <a-k> (\(|=>|<=|:=)$ <ret> j <a-gt> ]
+        try %[ execute-keys -draft <semicolon> , k x <a-k> (\(|=>|<=|:=)$ <ret> j <a-gt> ]
      }
 }
 
diff --git a/rc/filetype/yaml.kak b/rc/filetype/yaml.kak
index 6bc79a4e..db6a4f90 100644
--- a/rc/filetype/yaml.kak
+++ b/rc/filetype/yaml.kak
@@ -64,9 +64,9 @@ define-command -hidden yaml-indent-on-new-line %{
         # filter previous line
         try %{ execute-keys -draft k : yaml-trim-indent <ret> }
         # indent after :
-        try %{ execute-keys -draft <space> k x <a-k> :$ <ret> j <a-gt> }
+        try %{ execute-keys -draft , k x <a-k> :$ <ret> j <a-gt> }
         # indent after -
-        try %{ execute-keys -draft <space> k x <a-k> ^\h*- <ret> j <a-gt> }
+        try %{ execute-keys -draft , k x <a-k> ^\h*- <ret> j <a-gt> }
     }
 }
 
diff --git a/rc/tools/clang.kak b/rc/tools/clang.kak
index 7439ffab..cddf9003 100644
--- a/rc/tools/clang.kak
+++ b/rc/tools/clang.kak
@@ -111,7 +111,7 @@ define-command clang-complete -docstring "Complete the current selection" %{ cla
 
 define-command -hidden clang-show-completion-info %[ try %[
     evaluate-commands -draft %[
-        execute-keys <space>{( <a-k> ^\( <ret> b <a-k> \A\w+\z <ret>
+        execute-keys ,{( <a-k> ^\( <ret> b <a-k> \A\w+\z <ret>
         evaluate-commands %sh[
             desc=$(printf %s\\n "${kak_opt_clang_completions}" | sed -e "{ s/\([^\\]\):/\1\n/g }" | sed -ne "/^${kak_selection}|/ { s/^[^|]\+|//; s/|.*$//; s/\\\:/:/g; p }")
             if [ -n "$desc" ]; then
diff --git a/rc/tools/ctags.kak b/rc/tools/ctags.kak
index 5b18e04a..1d6b26c5 100644
--- a/rc/tools/ctags.kak
+++ b/rc/tools/ctags.kak
@@ -150,7 +150,7 @@ define-command ctags-enable-autocomplete -docstring "Enable automatic ctags comp
     hook window -group ctags-autocomplete InsertIdle .* %{
         try %{
             evaluate-commands -draft %{ # select previous word >= ctags_min_chars
-                execute-keys "<space>b_<a-k>.{%opt{ctags_min_chars},}<ret>"
+                execute-keys ",b_<a-k>.{%opt{ctags_min_chars},}<ret>"
                 ctags-complete          # run in draft context to preserve selection
             }
         }
diff --git a/rc/tools/grep.kak b/rc/tools/grep.kak
index dd86c0f0..ec036385 100644
--- a/rc/tools/grep.kak
+++ b/rc/tools/grep.kak
@@ -57,7 +57,7 @@ define-command grep-next-match -docstring 'Jump to the next grep match' %{
         # First jump to end of buffer so that if grep_current_line == 0
         # 0g<a-l> will be a no-op and we'll jump to the first result.
         # Yeah, thats ugly...
-        execute-keys "ge %opt{grep_current_line}g<a-l> /^[^:]+:\d+:<ret>"
+        execute-keys ge %opt{grep_current_line}g<a-l> /^[^:]+:\d+:<ret>
         grep-jump
     }
     try %{
@@ -72,7 +72,7 @@ define-command grep-previous-match -docstring 'Jump to the previous grep match'
     evaluate-commands -try-client %opt{jumpclient} %{
         buffer '*grep*'
         # See comment in grep-next-match
-        execute-keys "ge %opt{grep_current_line}g<a-h> <a-/>^[^:]+:\d+:<ret>"
+        execute-keys ge %opt{grep_current_line}g<a-h> <a-/>^[^:]+:\d+:<ret>
         grep-jump
     }
     try %{
diff --git a/src/main.cc b/src/main.cc
index f0088265..83d37a9d 100644
--- a/src/main.cc
+++ b/src/main.cc
@@ -49,6 +49,7 @@ struct {
         "» {+u}complete-command{} to configure command completion\n"
         "» {+b}!{} and {+b}<a-!>{} now select the inserted text\n"
         "» {+b}x{} now uses {+b}<a-x>{} behaviour\n"
+        "» {+b}<space>{} and {+b},{} have been swapped\n"
     }, {
         20211107,
         "» colored and curly underlines support (undocumented in 20210828)\n"
diff --git a/src/normal.cc b/src/normal.cc
index e68db583..c891d541 100644
--- a/src/normal.cc
+++ b/src/normal.cc
@@ -2269,8 +2269,8 @@ static constexpr HashMap<Key, NormalCmd, MemoryDomain::Undefined, KeymapBackend>
     { {'!'}, {"insert command output", insert_output<PasteMode::Insert>} },
     { {alt('!')}, {"append command output", insert_output<PasteMode::Append>} },
 
-    { {Key::Space}, {"remove all selections except main", keep_selection} },
-    { {alt(Key::Space)}, {"remove main selection", remove_selection} },
+    { {','}, {"remove all selections except main", keep_selection} },
+    { {alt(',')}, {"remove main selection", remove_selection} },
     { {';'}, {"reduce selections to their cursor", clear_selections} },
     { {alt(';')}, {"swap selections cursor and anchor", flip_selections} },
     { {alt(':')}, {"ensure selection cursor is after anchor", ensure_forward} },
@@ -2374,7 +2374,7 @@ static constexpr HashMap<Key, NormalCmd, MemoryDomain::Undefined, KeymapBackend>
     { {'C'}, {"copy selection on next lines", copy_selections_on_next_lines<Forward>} },
     { {alt('C')}, {"copy selection on previous lines", copy_selections_on_next_lines<Backward>} },
 
-    { {','}, {"user mappings", exec_user_mappings} },
+    { {Key::Space}, {"user mappings", exec_user_mappings} },
 
     { {Key::PageUp}, {  "scroll one page up", scroll<Backward>} },
     { {Key::PageDown}, {"scroll one page down", scroll<Forward>} },
diff --git a/test/compose/undo-multi-replace-at-end/cmd b/test/compose/undo-multi-replace-at-end/cmd
index 0c359aa9..40dacb04 100644
--- a/test/compose/undo-multi-replace-at-end/cmd
+++ b/test/compose/undo-multi-replace-at-end/cmd
@@ -1 +1 @@
-%<a-s>y1<a-space>Ru
+%<a-s>y1<a-,>Ru
diff --git a/test/indent/javascript/deindent-complex-brace-structure/cmd b/test/indent/javascript/deindent-complex-brace-structure/cmd
index f9bfe77d..4a6870e5 100644
--- a/test/indent/javascript/deindent-complex-brace-structure/cmd
+++ b/test/indent/javascript/deindent-complex-brace-structure/cmd
@@ -1 +1 @@
-c<ret><esc>Oif (true) {}<esc>hi<ret><esc>Oconsole.log();<esc>hhi<ret><esc>O{},<ret>{},<esc>hh<a-C>i<ret><esc>1<space>Ofoo: { bar: 1 },<esc>jjobaz: { bam: 2 },<esc>
+c<ret><esc>Oif (true) {}<esc>hi<ret><esc>Oconsole.log();<esc>hhi<ret><esc>O{},<ret>{},<esc>hh<a-C>i<ret><esc>1,Ofoo: { bar: 1 },<esc>jjobaz: { bam: 2 },<esc>
diff --git a/test/normal/rotate/cmd b/test/normal/rotate/cmd
index 90f0818a..4de3674c 100644
--- a/test/normal/rotate/cmd
+++ b/test/normal/rotate/cmd
@@ -1 +1 @@
-)<a-space>
+)<a-,>
diff --git a/test/regression/3909-crash-on-closing-buffer-with-user-mapping/cmd b/test/regression/3909-crash-on-closing-buffer-with-user-mapping/cmd
index b870f425..c2f3e902 100644
--- a/test/regression/3909-crash-on-closing-buffer-with-user-mapping/cmd
+++ b/test/regression/3909-crash-on-closing-buffer-with-user-mapping/cmd
@@ -1 +1 @@
-i<a-;>,d<esc>
+i<a-;><space>d<esc>