From 44441de8cad7255fd0637459ed39b89e34751b78 Mon Sep 17 00:00:00 2001 From: Fred Sundvik Date: Sun, 7 Aug 2016 17:04:39 +0300 Subject: Split keyboard makefiles into rules and Makefile --- keyboards/lets_split/rules.mk | 74 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 keyboards/lets_split/rules.mk (limited to 'keyboards/lets_split/rules.mk') diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk new file mode 100644 index 0000000000..6961fbd556 --- /dev/null +++ b/keyboards/lets_split/rules.mk @@ -0,0 +1,74 @@ +SRC += matrix.c \ + i2c.c \ + split_util.c \ + serial.c + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= no # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= yes # Audio output on port C6 +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend + +CUSTOM_MATRIX = yes \ No newline at end of file -- cgit v1.2.3 From 6631abc1cb0e570271bcf33464e3af17b6fc0b87 Mon Sep 17 00:00:00 2001 From: IBNobody Date: Tue, 20 Sep 2016 21:38:59 -0500 Subject: Made Serial and I2C not include the Other This saves 192 bytes --- keyboards/lets_split/rules.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'keyboards/lets_split/rules.mk') diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index 6961fbd556..6fde8a444c 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -52,7 +52,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Build Options -# change to "no" to disable the options, or define them in the Makefile in +# change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) @@ -71,4 +71,4 @@ RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -CUSTOM_MATRIX = yes \ No newline at end of file +CUSTOM_MATRIX = yes -- cgit v1.2.3 From 1dd6ceb45dfcf5f0991b84fea5a761a35df7fcda Mon Sep 17 00:00:00 2001 From: climbalima Date: Wed, 16 Nov 2016 19:18:54 -0500 Subject: Updated my repo to current qmk --- keyboards/lets_split/rules.mk | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'keyboards/lets_split/rules.mk') diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index 6fde8a444c..1aee5313c1 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -63,11 +63,12 @@ COMMAND_ENABLE ?= yes # Commands for debug and configuration NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= yes # Audio output on port C6 +AUDIO_ENABLE ?= no # Audio output on port C6 UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - +RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SUBPROJECT_rev1 ?= yes +USE_I2C ?= yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -- cgit v1.2.3 From 3131d655638927fb1802c6526f7b9b7afff03a5e Mon Sep 17 00:00:00 2001 From: Nic Aitch Date: Thu, 26 Jan 2017 09:31:27 -0600 Subject: Add avrdude target --- keyboards/lets_split/rules.mk | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'keyboards/lets_split/rules.mk') diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index 1aee5313c1..0dc5491302 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -73,3 +73,13 @@ USE_I2C ?= yes SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend CUSTOM_MATRIX = yes + +avrdude: build + ls /dev/tty* > /tmp/1; \ + echo "Reset your Pro Micro then hit any key to continue..."; \ + read -n 1 -s; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep '>' | sed -e 's/> //'`; \ + avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex + +.PHONY: avrdude -- cgit v1.2.3 From 3dbdd153040087f23d63204b142f355936ae8bc0 Mon Sep 17 00:00:00 2001 From: Nic Aitch Date: Mon, 6 Feb 2017 19:57:34 -0600 Subject: Check for a new serial port every second --- keyboards/lets_split/rules.mk | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'keyboards/lets_split/rules.mk') diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index 0dc5491302..0efa785505 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -76,10 +76,12 @@ CUSTOM_MATRIX = yes avrdude: build ls /dev/tty* > /tmp/1; \ - echo "Reset your Pro Micro then hit any key to continue..."; \ - read -n 1 -s; \ - ls /dev/tty* > /tmp/2; \ - USB=`diff /tmp/1 /tmp/2 | grep '>' | sed -e 's/> //'`; \ + echo "Reset your Pro Micro now"; \ + while [[ -z $$USB ]]; do \ + sleep 1; \ + ls /dev/tty* > /tmp/2; \ + USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \ + done; \ avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex .PHONY: avrdude -- cgit v1.2.3